Produkte

1 2 3 4 5 6 7 8 9 10

Rolling Mill Stand

AFE 2-High Stands are manufactured in two types and various dimensions tobe used as Roughing, Intermediate and Finishing Stands. Our products have the guarantee for engineering, manufacturing and radiographically, sand-blasted and heat-treated for normalization. All necessary quality control tests are aplied after machining and shop erction. Some , features of our 2-High Stands are as follows; Because of their high rigidity, a close-tolerance of the rolled product is obtained. The rolls are supported with grease lubricated roller bearings. The lower rolls are axially adjusted trough hinged clamps and tie rods located on one side of the stand. Entry and exit rest bar are vertically adjustable. The stands are simly operated and requires low maintenance. The Stands are suitable to be used as horizantal and vertical bath. If desired, hydraulicalby actuated wedges may be used to secure the stands on baseplates. If the pass line is desired to be fixed, a hydraulically actuated system which traverses the stands in relation to the passed may be added.

1 2 3 4

Gear Boxes

Standart gear box models from 0.5 HP to 1800 HP power rating,include a large assortment of drivers in a wide range of ratios and various configurations. They are highly adaptable to many applications in many different industries. In addition to the standart production,special gearboxes to specific requirements of various plants are produced also. All important operating features such as load carrying,capacity,stiffness,vibration,characteristics,efficiency,noise level etc.have been optimized with the aid of modern technology and the latest test procedures.

1 2 3 4 5 6 7

Flying Shear

Flying shears are used for cutting bars and sections during rolling process.According to the configuration they can be used for cropping,scrapping and length cutting purposes at different rolling speeds.To fulfill these different needs,AFE flying shears are designed in several types, either driving systems,mechanical construction and control point of views.The shears are driven by an electric motor and pneumatic clutch-brake system.All the shears can be equipped with hot metal detector and electronic programmer,if desired. The same flying shears can be made as start-stop type. Since the knives of the crank type shears keep their vertical position during cutting operation,these type of flying shears are specially used for bigger sections,flats,angles,U-channels and I-beams,Where the perpendicularity of the cut surface becomes more critical.

1 2 3 4 5 6 7

Cold Shear

AFE Cold Shears are designed to cut different quality of metals with the wide length of blade and powerfull shearing capacity. Especially, it is used to cut all bars produced in the rolling mills, on the cooling bed outlet, into commercial lengths. It provides fully automatic working at high capacity with the electro-pneumatic combined clutch-brake system, mechanism and digital counter equipment. Also, it can be equipped with inlet-outlet roller ways, adjustable buffer mechanisation. It can be designed and manufactured according to the orders for differend capacities and special equipments.

1 2 3

Cooling Bed

AFE designs and manufactures the cooling beds, which are used for having straight and uniformly cooled bars and sections, in different types and dimensions according to customers requirements. Since rake type cooling beds give best results for optimum cooling this system is generally used in our designs. In this system the rolled materials are conveyed step by on fixed rakes by the walking beam action of moving rakes. In round bar and small section rolling mills the hot rolled materials are first cooled of on cast iron rakes for improved straightening effect. All of our cooling beds are desidned to minimize the thermal stresses and distortions, and especially in long cooling beds the critial part are cooled with water.

1 2 3 4 5 6 7 8

Scrap Presses

These are the machines that help to press and bale the meta and aluminium scrap metals.

The presses are made in body-welded construction. They are covered with steel sheathing at the places that wear out most. Additionally, there are sharp blades at the point where the upper cover and the body meet.

The hydraulic cylinders are pressurised with tandem pumps. Thus, low-speed operation at high pressure is provided.

The scrap presses can be manufactured in different sizes, as dual and triple presses. They carry the AFE engineering and quality warranty.

1 2 3

H Type Hydraulic Press

H Type Hydraulic Press Table

1 2 3

C Type Hydraulic Press

1 2 3

Welded Product

1 2 3 4 5 6 7 8 9

Machining With Discrete Parts Manufacturing

With the help of its highly experienced staff and its wide and modern machinery park facility, Afe Olgunlar carries out the fabrication of moulds and apparatus and the machining of parts designed for industrial purposes in accordance with its customers specific applications. It makes use of the most advanced technology and everything is done with the utmost care.

1 2 3

Custom Built Machinery